Quartus II调用ModelSim出错（ModelSim无法启动）

tuzuyao · 发表于 2022-1-23 23:51:27

请教大家关于Quartus调用ModelSim的问题：

1 在完整安装完Quartus II 13.0.1.232和modelsim-win64-10.5-se（注：ModelSim未安装Hardware Secuirty Key Driver,否则电脑会蓝屏退出安装流程）之后，选择征途Pro开发板的例程进行仿真，弹出以下错误。

Quartus调用ModelSim出错.png

2 截取了.rpt日志进行分析，提示是ModelSim安装或者是环境变量设置的问题。

Info: Start Nativelink Simulation process
Info: NativeLink has detected Verilog design -- Verilog simulation models will be used

========= EDA Simulation Settings =====================

Sim Mode             :  RTL
Family             :  cycloneive
Quartus root       :  d:/fpga_software/quartusii_13.0/quartus/bin64/
Quartus sim root    :  d:/fpga_software/quartusii_13.0/quartus/eda/sim_lib
Simulation Tool    :  modelsim
Simulation Language :  verilog
Simulation Mode    :  GUI
Sim Output File    :
Sim SDF file       :
Sim dir             :  simulation\modelsim

=======================================================

Info: Starting NativeLink simulation with ModelSim software
Sourced NativeLink script d:/fpga_software/quartusii_13.0/quartus/common/tcl/internal/nativelink/modelsim.tcl
Warning: File led_run_msim_rtl_verilog.do already exists - backing up current file as led_run_msim_rtl_verilog.do.bak2
Info: Spawning ModelSim Simulation software
Error: Can't launch ModelSim Simulation software -- make sure the software is properly installed and the environment variable LM_LICENSE_FILE or MGLS_LICENSE_FILE points to the correct license file.
couldn't execute "D:\FPGA_Software\ModelSim_SE_10_5\win64\modelsim.exe": invalid argument
while executing
"exec $msim_exec_exe $msim_exec_option  -l msim_transcript -do $msim_do_file_name \& "
Error: NativeLink simulation flow was NOT successful

3 排查ModelSim安装和环境变量均正常，如下图（注：用户环境变量和系统变量都试过，都不管用）。

ModelSim SE-64 10.5.png