sd卡启动成功后，在fire-config中选择了wifi使能和刷机到emmc中，重新启动后卡住，log在下面，这个该怎么解决啊
================================================================================
Starting eMMC Flasher from microSD media
Version: [1.20180412: all ssh regneration override...]
================================================================================
================================================================================
Prepare environment for flashing
Starting at Thu Jan 1 08:34:42 CST 1970
----------------------------------------
==> Giving system time to stablize...
5 4 3 2 1
==> Preparing /tmp
==> Preparing sysctl
==> sysctl: vm.min_free_kbytes=[1622]
==> sysctl: setting: [sysctl -w vm.min_free_kbytes=16384]
vm.min_free_kbytes = 16384
----------------------------------------
==> Determining root drive
----------------------------------------
==> root_drive=[/dev/mmcblk1p2]
====> Root drive identified at [/dev/mmcblk1p2]
==> Boot Drive [/dev/mmcblk1p1]
==> Figuring out Source and Destination devices
====> Source identified: [/dev/mmcblk1]
====> Destination identified: [/dev/mmcblk0]
==> Figuring out machine
====> Machine is Embedfire_i.MX6ULL_Board
====> Machine is compatible with BeagleBone Black
====> The Boot and Root drives are identified to be different.
====> Giving system time to stablize...
5 4 3 2 1
====> Mounting /dev/mmcblk1p1 Read Only over /boot/uboot
[ 23.104076] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
================================================================================
5 4 3 2 1
========================================
Checking for Valid bbb-eeprom header
================================================================================
Checking running system
==> Copying: [/dev/mmcblk1] -> [/dev/mmcblk0]
==> lsblk:
----------------------------------------
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
mmcblk1 179:0 0 7.3G 0 disk
|-mmcblk1p1 179:1 0 40M 0 part /boot/uboot
`-mmcblk1p2 179:2 0 7.2G 0 part /
mmcblk1boot0 179:8 0 4M 1 disk
mmcblk1boot1 179:16 0 4M 1 disk
----------------------------------------
==> df -h | grep rootfs:
----------------------------------------
!==> Error: [/dev/mmcblk0] does not exist
writing to [/dev/mmcblk0] failed...
==> Stopping Cylon LEDs ...
Traceback (last called is first):
reset_leds() in /opt/scripts/tools/eMMC/functions.sh:432
write_failure() in /opt/scripts/tools/eMMC/functions.sh:450
check_running_system() in /opt/scripts/tools/eMMC/functions.sh:613
main() in /opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh:47
The command kill $CYLON_PID > /dev/null 2>&1 exited with exit code 2.
================================================================================
Tearing Down script environment
==> Unmounting /tmp
blockdev: cannot open /dev/mmcblk0: No such file or directory
==> Stopping Cylon LEDs ...
[ 28.639310] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
[ 28.639310]
[ 28.648560] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
[ 28.648560] ]---
[ 121.498723] random: crng init done
发表于 
提升卡
楼主
