关于液晶屏显示中文字符的问题

lyp82nxb

有没有大佬帮小弟看一下这段代码写的哪有问题，这个代码是用来从字库里获取中文字符的字模数据

1. void GetGB2312Mod(uint8_t *readbuffer,char* Char)
   
2. {
   
3.         static uint8_t read=0;
   
4.         uint8_t i=0;
   
5.         uint8_t firstbyte,high8bit,low8bit;
   
6.         if(read==0)
   
7.         {
   
8.                 spi_init();
   
9.                 read=1;
   
10.         }
    
11.         high8bit=*Char;
    
12.         low8bit=*(Char+1);
    
13.         firstbyte=((high8bit-0xa1)*94+low8bit-0xa1)*16*16/8;
    
14.         flash_readbuffer((387*4096)+firstbyte,readbuffer,32);
    
15.         for(i=0;i<32;i++)
    
16.         {
    
17.                 printf("0x%x ",readbuffer[i]);
    
18.         }
    
19. }
    
20. 
    
21. 
    
22. void flash_readbuffer(uint32_t address,uint8_t *data,uint16_t count)
    
23. {
    
24.         CS_L;
    
25.         spi_writebyte(0x03);
    
26.         spi_writebyte((address&0xff0000)>>16);
    
27.         spi_writebyte((address&0xff00)>>8);
    
28.         spi_writebyte(address&0xff);
    
29.         while(count--)
    
30.         {
    
31.                 *data=spi_readbyte();
    
32.                 data++;
    
33.         }
    
34.         CS_H;
    
35. }

复制代码

lyp82nxb

我想显示一个"你"字，字的字模为
{0x08,0x80,0x08,0x80,0x08,0x80,0x11,0xFE,0x11,0x02,0x32,0x04,0x34,0x20,0x50,0x20,0x91,0x28,0x11,0x24,0x12,0x24,0x12,0x22,
0x14,0x22,0x10,0x20,0x10,0xA0,0x10,0x40}
而我读出来的却是
{0x00,0x00,0x00,0x00,0x00,0x00,0x0f,0xe0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0}

一级菜鸟

lyp82nxb 发表于 2021-10-10 19:59
我想显示一个"你"字，字的字模为
{0x08,0x80,0x08,0x80,0x08,0x80,0x11,0xFE,0x11,0x02,0x32,0x04,0x34,0x2 ...

重新刷下外部FLASH

lyp82nxb

一级菜鸟 发表于 2021-10-11 16:00
重新刷下外部FLASH

刷过了，还是不行

lyp82nxb

一级菜鸟 发表于 2021-10-11 16:00
重新刷下外部FLASH

我找到问题了，我把字模首地址定义成8位的了。。。。。