IM6ULL 驱动部分

微信用户-iQQn1x

再执行  sudo ./make_deb.sh 时

为什么会 报这些错误呢

UPD     include/generated/compile.h
  CC      init/do_mounts.o
  CC      arch/arm/vdso/vgettimeofday.o
/tmp/ccEKCQ5E.s: Assembler messages:
/tmp/ccEKCQ5E.s:35: 错误： selected processor does not support `dmb ish' in ARM mode
/tmp/ccEKCQ5E.s:49: 错误： selected processor does not support `isb ' in ARM mode
/tmp/ccEKCQ5E.s:52: 错误： selected processor does not support `mrrc p15,1,r4,r5,c14' in ARM mode
/tmp/ccEKCQ5E.s:68: 错误： selected processor does not support `dmb ish' in ARM mode
/tmp/ccEKCQ5E.s:83: 错误： selected processor does not support `dmb ish' in ARM mode
/tmp/ccEKCQ5E.s:176: 错误： selected processor does not support `dmb ish' in ARM mode
/tmp/ccEKCQ5E.s:186: 错误： selected processor does not support `dmb ish' in ARM mode
/tmp/ccEKCQ5E.s:205: 错误： selected processor does not support `dmb ish' in ARM mode
/tmp/ccEKCQ5E.s:217: 错误： selected processor does not support `dmb ish' in ARM mode
/tmp/ccEKCQ5E.s:286: 错误： selected processor does not support `dmb ish' in ARM mode
/tmp/ccEKCQ5E.s:297: 错误： selected processor does not support `isb ' in ARM mode
/tmp/ccEKCQ5E.s:300: 错误： selected processor does not support `mrrc p15,1,r6,r7,c14' in ARM mode
/tmp/ccEKCQ5E.s:319: 错误： selected processor does not support `dmb ish' in ARM mode
make[2]: *** [/home/lighting/Linux_Driver/ebf-buster-linux/scripts/Makefile.build:304：arch/arm/vdso/vgettimeofday.o] 错误 1
make[1]: *** [/home/lighting/Linux_Driver/ebf-buster-linux/Makefile:1046：arch/arm/vdso] 错误 2
make[1]: *** 正在等待未完成的任务....
/tmp/cc2eK4sL.s: Assembler messages:
/tmp/cc2eK4sL.s:311: 错误： selected processor does not support `isb ' in ARM mode
/tmp/cc2eK4sL.s:595: 错误： selected processor does not support `isb ' in ARM mode
make[2]: *** [/home/lighting/Linux_Driver/ebf-buster-linux/scripts/Makefile.build:304：arch/arm/vfp/vfpmodule.o] 错误 1
make[1]: *** [/home/lighting/Linux_Driver/ebf-buster-linux/Makefile:1046：arch/arm/vfp] 错误 2

这是我的编译器版本

ecking=release --disable-bootstrap --enable-languages=c,c++,fortran,lto --build=x86_64-unknown-linux-gnu --host=x86_64-unknown-linux-gnu --target=arm-linux-gnueabihf --prefix=/home/tcwg-buildslave/workspace/tcwg-make-release_1/_build/builds/destdir/x86_64-unknown-linux-gnu
线程模型：posix
gcc 版本 7.5.0 (Linaro GCC 7.5-2019.12)

YiangYiang

这个是我们网盘虚拟机的GCC版本，好像最高支持到ubuntu18的7.5.0。你那个ubuntu是什么版本的？是不是都是7.5但是ubuntu版本不一样导致出现这个问题了？

微信用户-iQQn1x

我的ubuntu版本可能有点高了（22.04 z之前一直用的） 我试试降低gcc版本吧  谢谢

微信用户-iQQn1x

好的我降了gcc到7.5.0也不行 我再试试咱链接里的ubuntu18吧

微信用户-iQQn1x

我换了ubuntu18 就行了 好的感谢

羊烊

版本不一致总会出现问题，所以还不能轻易更新版本。