多个中断怎么配置

1069182055

两个中断这里怎么配置
  /* ÅäÖÃÖжÏÔ´ */
  NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQn;
/* ÅäÖ&Atilde[A|B|C|D|E]13ΪÖжÏÔ´ */
  NVIC_InitStructure.NVIC_IRQChannel = EXTI15_10_IRQn;

complicated

static void NVIC_Configuration(void)
{
  NVIC_InitTypeDef NVIC_InitStructure;
  
  /* Configure one bit for preemption priority */
  NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);
  
  /* ÅäÖ&#195[A|B|C|D|E]13ÎaÖD¶ÏÔ′ */
        NVIC_InitStructure.NVIC_IRQChannel = EXTI15_10_IRQn;
        NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
        NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
        NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
        NVIC_Init(&NVIC_InitStructure);
       
       
       
        NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQn;
        NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
        NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
        NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
       
       
        NVIC_Init(&NVIC_InitStructure);
       
}

/**
  * @brief  ÅäÖà PC13 ÎaÏßÖD¶Ï¿ú￡¬2￠éèÖÃÖD¶ÏóÅÏ輶
  * @param  ÎT
  * @retval ÎT
  */
void EXTI_PC13_Config(void)
{
        GPIO_InitTypeDef GPIO_InitStructure;
        EXTI_InitTypeDef EXTI_InitStructure;

        /* config the extiline(PC13) clock and AFIO clock */
        RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC | RCC_APB2Periph_GPIOA |RCC_APB2Periph_AFIO,ENABLE);
                                                                                               
        /* config the NVIC(PC13) */
        NVIC_Configuration();

        /* EXTI line gpio config(PC13) */       
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_13;      
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;         // éÏà-êäèë
GPIO_Init(GPIOC, &GPIO_InitStructure);
       


        /* EXTI line(PC13) mode config */
        GPIO_EXTILineConfig(GPIO_PortSourceGPIOC, GPIO_PinSource13);
        EXTI_InitStructure.EXTI_Line = EXTI_Line13;
        EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
        EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling; //ϽμÑØÖD¶Ï
        EXTI_InitStructure.EXTI_LineCmd = ENABLE;
       
        EXTI_Init(&EXTI_InitStructure);
       
        /* EXTI line gpio config(PA0) */       
        GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;      
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;         // éÏà-êäèë
GPIO_Init(GPIOA, &GPIO_InitStructure);

/* EXTI line(PA0) mode config */
        GPIO_EXTILineConfig(GPIO_PortSourceGPIOA, GPIO_PinSource0);
        EXTI_InitStructure.EXTI_Line = EXTI_Line0;
        EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
        EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling; //ϽμÑØÖD¶Ï
        EXTI_InitStructure.EXTI_LineCmd = ENABLE;
       
       
        EXTI_Init(&EXTI_InitStructure);

1069182055

强烈支持，非常感谢哥们