关于f429 can回环测试和双击通信hal库历程编译报错

kaizi35

1. *** Using Compiler 'V5.06 update 1 (build 61)', folder: 'd:\Keil_v5\ARM\ARMCC\Bin'
   
2. Build target 'Target 1'
   
3. compiling stm32f4xx_hal_dcmi.c...
   
4. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi.c(188): error:  #20: identifier "DCMI_ESCR_LSC" is undefined
   
5.                                ((uint32_t)hdcmi->Init.SyncroCode.LineStartCode <<
   
6. CMI_POSITION_ESCR_LSC)|
   
7. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi.c(189): error:  #20: identifier "DCMI_ESCR_LEC" is undefined
   
8.                                ((uint32_t)hdcmi->Init.SyncroCode.LineEndCode <<
   
9. CMI_POSITION_ESCR_LEC) |
   
10. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi.c(190): error:  #20: identifier "DCMI_ESCR_FEC" is undefined
    
11.                                ((uint32_t)hdcmi->Init.SyncroCode.FrameEndCode <<
    
12. CMI_POSITION_ESCR_FEC));
    
13. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi.c(194): error:  #20: identifier "DCMI_IER_OVR_IE" is undefined
    
14.    
    
15. _HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_LINE | DCMI_IT_VSYNC | DCMI_IT_ERR | DCMI_IT_OVR);
    
16. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi.c(513): error:  #20: identifier "DCMI_RISR_OVR_RIS" is undefined
    
17.     if((isr_value &
    
18. CMI_FLAG_OVRRI) == DCMI_FLAG_OVRRI)
    
19. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi.c(555): error:  #20: identifier "DCMI_IER_OVR_IE" is undefined
    
20.         
    
21. _HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_LINE | DCMI_IT_VSYNC | DCMI_IT_ERR | DCMI_IT_OVR);
    
22. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi.c(670): error:  #20: identifier "DCMI_CWSIZE_VLINE" is undefined
    
23.     hdcmi->Instance->CWSIZER = (XSize | (YSize <<
    
24. CMI_POSITION_CWSIZE_VLINE));
    
25. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi.c(671): error:  #20: identifier "DCMI_CWSTRT_VST" is undefined
    
26.     hdcmi->Instance->CWSTRTR = (X0 | (Y0 <<
    
27. CMI_POSITION_CWSTRT_VST));
    
28. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi.c: 0 warnings, 8 errors
    
29. compiling stm32f4xx_hal_dma2d.c...
    
30. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma2d.c(1669): error:  #20: identifier "DMA2D_OPFCCR_CM_0" is undefined
    
31.       else if (hdma2d->Init.ColorMode ==
    
32. MA2D_OUTPUT_RGB888)
    
33. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma2d.c(1673): error:  #20: identifier "DMA2D_OPFCCR_CM_1" is undefined
    
34.       else if (hdma2d->Init.ColorMode ==
    
35. MA2D_OUTPUT_RGB565)
    
36. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma2d.c: 0 warnings, 2 errors
    
37. compiling stm32f4xx_hal_dcmi_ex.c...
    
38. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi_ex.c(158): error:  #20: identifier "DCMI_ESCR_LSC" is undefined
    
39.                                ((uint32_t)hdcmi->Init.SyncroCode.LineStartCode <<
    
40. CMI_POSITION_ESCR_LSC)|
    
41. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi_ex.c(159): error:  #20: identifier "DCMI_ESCR_LEC" is undefined
    
42.                                ((uint32_t)hdcmi->Init.SyncroCode.LineEndCode <<
    
43. CMI_POSITION_ESCR_LEC) |
    
44. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi_ex.c(160): error:  #20: identifier "DCMI_ESCR_FEC" is undefined
    
45.                                ((uint32_t)hdcmi->Init.SyncroCode.FrameEndCode <<
    
46. CMI_POSITION_ESCR_FEC));
    
47. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi_ex.c(165): error:  #20: identifier "DCMI_IER_OVR_IE" is undefined
    
48.    
    
49. _HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_LINE | DCMI_IT_VSYNC | DCMI_IT_ERR | DCMI_IT_OVR);
    
50. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dcmi_ex.c: 0 warnings, 4 errors
    
51. compiling stm32f4xx_hal_sai.c...
    
52. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sai.c(471): error:  #20: identifier "SAI_xFRCR_FSPOL" is undefined
    
53.                              SAI_xFRCR_FSPOL | SAI_xFRCR_FSOFF));
    
54. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sai.c(1661): error:  #20: identifier "SAI_xFRCR_FSPOL" is undefined
    
55.       hsai->FrameInit.FSPolarity =
    
56. AI_FS_ACTIVE_HIGH;
    
57. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sai.c(1736): error:  #20: identifier "SAI_xFRCR_FSPOL" is undefined
    
58.     hsai->FrameInit.FSPolarity     =
    
59. AI_FS_ACTIVE_HIGH;
    
60. ..\Libraries\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_sai.c: 0 warnings, 3 errors
    
61. "..\Output\YH-F429.axf" - 17 Error(s), 0 Warning(s).
    
62. Target not created.
    
63. Build Time Elapsed:  00:00:02

复制代码

求解怎么解决啊

kaizi35

我全部把这些错误的地方注释掉以后烧写，，在编译又是一大推错误

WishWish

40-CAN通信实验.rar (4.49 MB, 下载次数: 17)

2021-2-25 09:03 上传

点击文件名下载附件

试了编译没有问题
确认重新下载好资料
野火STM32F429挑战者_V1_V2开发板 — 野火产品资料下载中心 文档 (embedfire.com)

kaizi35

WishWish 发表于 2021-2-25 09:07
试了编译没有问题
确认重新下载好资料
野火STM32F429挑战者_V1_V2开发板 — 野火产品资料下载中心 文档 ( ...

试过了还是不行，，跟编译器版本又关系吗

IDE-Version:
μVision V5.17.0.0
Copyright (C) 2015 ARM Ltd and ARM Germany GmbH. All rights reserved.

License Information:
sa Administrator
sa
LIC=VGXG8-3LLQZ-MMA9I-TK8MA-NW0ZS-D02YR

Tool Version Numbers:
Toolchain:        MDK-ARM Standard  Version: 5.17
Toolchain Path:    d:\Keil_v5\ARM\ARMCC\Bin
C Compiler:         Armcc.exe        V5.06 update 1 (build 61)
Assembler:          Armasm.exe        V5.06 update 1 (build 61)
Linker/Locator:     ArmLink.exe        V5.06 update 1 (build 61)
Library Manager:    ArmAr.exe        V5.06 update 1 (build 61)
Hex Converter:      FromElf.exe        V5.06 update 1 (build 61)
CPU DLL:               SARMCM3.DLL          V5.17
Dialog DLL:         DCM.DLL              V1.13.4.0
Target DLL:             UL2CM3.DLL           V1.156.1.0
Dialog DLL:         TCM.DLL              V1.14.6.0

kaizi35

解决了，，是pack包版本的问题     之前是Keil.STM32F4xx_DFP.2.7.0    换成Keil.STM32F4xx_DFP.2.14.0就可以了